Photo: © D+H Deutschland News | January 2025 D+H Deutschland takes a division from EHP Krüger D+H Deutschland GmbH took over the smoke and heat extraction division from EHP Krüger GmbH (Ennepetal) as part of an asset deal.
Photo: © LIFTjournal / Bernd Lorenz News | January 2025 Josep Monroig switching to Poland The Fermator Group has transferred Josep Monroig to its subsidiary Enginova in Poland. The intention was to boost business activity and global presence.
Photo: © Elfin News | January 2025 New monitoring solution for the maintenance process Elfin has launched a new solution for lift maintenance. The monitoring gateway “eleon S1” provides important cross-manufacturer operating data and is intended in this way to support targeted optimisation of maintenance processes.
Photo: © Donati News | January 2025 Donati acquires Elvacenter Group Donati is putting out its feelers in the BeNeLux region. The component supplier from Italy has purchased its competitor Elvacenter, which operates primarily in Belgium and the Netherlands.
(Photo: © Elena Shchipkova/123RF.com) Subscription You can order your LIFTjournal subscription here or also request a free trial issue without obligation.
(Photo: © Jakub Krechowicz/123RF.com) Newsletter The free LIFTjournal newsletter provides subscribers with industry information monthly. Subscribe for it here.
(Photo: © © rawpixel/123RF.com) Advertising rates We are experts in presenting industry products and services. Would you like to place an ad in the LIFTjournal magazine or on our homepage? You can find the current media data for print and online here.
(Photo: © dolphfyn/123RF.com) Contact persons You can find your contacts for the editorial office, adverts and subscriptions here.
(Photo: © Monika Nonnenmacher) Verlagsanstalt Handwerk The Verlagsanstalt Handwerk provides SMEs with a wide range of business literature. Newspapers and magazines, books and e-media.
(Photo: © 3ddock/123RF.com) Bookshop Order what the industry is reading here – it’s easy and uncomplicated. And what you like to read in your spare time.
Photo: © Kone News | January 2024 Up and away with the Kone double decker When you read this LIFTjournal, it will be almost complete: the “East Side Berlin”, currently the highest building in the German capital. But it is not just its height and extraordinary architecture that make it remarkable: ...
Photo: © Yaskawa Europe News | January 2024 Latest generation frequency converters Yaskawa presented its LA500 and LA700 converter models at the interlift, part of its current LA series. According to Yaskawa, the new models are to make lifts safer, more comfortable and sustainable. This only required minimal changes to the existing configuration.
Photo: © Hydroware News | January 2024 Reshaping the status quo for hydraulic lifts Hydroware, a manufacturer of lift drive and control systems, introduced their new regenerative inverter drive at interlift 2023, powering both the TractionElite ECO and HydroElite VICI on two real-size lift shafts in Hydroware’s booth.
Photo: © Otis Elevator Co. News | January 2024 New President for Otis EMEA Enrique Miñarro Viseras has been appointed President of Otis Europe, Middle East and Africa (EMEA). He will report directly to Otis Chairman, CEO and President, Judy Marks. Miñarro Viseras has succeeded Bernardo Calleja.
Photo: © VDMA News | January 2024 DAfA elects new chair The Deutsche Ausschuss für Aufzüge (DAfA – German Committee for Lifts) has elected Dr Peter Hug, managing director of the VDMA Trade Association Lifts and Escalators, as its new chair.
Photo: © Wittur News | January 2024 Wittur: New Division with new Managing Director Wittur Group had created a new Project Business and Field Services EMEA Division led by Andrea Gorlezza.
Photo: © Kone News | December 2023 New President and CEO of Kone Corporation Kone's Board of Directors has appointed Philippe Delorme President and CEO of Kone Corporation as of January 1, 2024.
Photo: © Hilti News | December 2023 The Hilti MT System for the lift sector Hilti specifically expanded its new MT assembly system with wall connections for beam profiles, connections for pillars and attachment elements for rail consoles to allow it to be used by the lift sector for support structures.
Photo: © Hilti News | December 2023 Why does the lift sector use assembly systems so seldom? If the shaft wall is too far away to attach guide rails directly, support structures are needed. For this purpose, Hilti has developed a new modular assembly system for the lift sector. But why does the lift sector use assembly systems so seldom?
